Home » Tetra Pak Process Valves » Tetra Pak Unique Single Seat Valves

Tetra Pak Unique Single Seat Valves

SSSV – Small Single Seat Valve 
The sanitary and flexible design of the Small Singel Seat valve can be used in a wide range of applications, as a stop valve with 2-3 ports. The valve is suitable for use in food, beverage, dairy and pharmaceutical industries. The valve is available as DN/OD 12.7 mm and 19 mm and consist of actuator, sealing element, lip seal, plug and valve bodies. Bodies and actuator are assembled with clamps.
Features
Material: 1.4404 (316L)
Inside surface finish: Ra ≤ 0.5 µm

SSV – Single Seat Valve

The body of the Unique SSV ≥ 51mm/DN50 has no welds. It’s annealed with an excellent
surface finish, meeting the highest standards of hygiene. Superior cleanability is assured by the ballshaped body with no dead zones, and a seat ring with enhanced cleaning-inplace capabilities.
A double working lip seat also minimizes the risk of contamination.
The valve has EHEDG certification and fulfill 3A demands.
It also offers good traceability in compliance with the EU Food Regulation 1935/2004.

Features

Material: 1.4404 (316L)
Inside surface finish: Ra ≤ 0.8 µm
Outside surface finish: Blasted
Option
Maintainable acuator (can change NC/NO)

SSV – Single Seat Valve Aseptic 

A valve designed for aseptic processing and it is available in Shut-off and Change-over versions. The diaphragm is in one-piece to ensure hermetic sealing towards the athmospere.
The valve is designed, tested and approved according to EHEDG guidelines.

SSSV – Small Singel Seat Valves

SSSV 20
Normally closed (NC)
Connection: Welding ends
Seals: EPDM
SSSV 21
Normally closed (NC)
Connection: Welding ends
Seals: EPDM/FPM
SSV – Single Seat Valves – Inch – Manual operating
SSV 200 Man
Connection: Welding ends
Seals: EPDM
SSV 300 Man
Connection: Welding ends
Seals: EPDM
SSV – Single Seat Valves – Manual regulating
SSV 200, DIN
Connection: Welding ends
Seals: EPDM
SSV 200, Inch
Connection: Welding ends
Seals: EPDM
SSV – Single Seat Valves – (NO) – Inch
SSV 200
Normally open (NO)
Connection: Welding ends
Seals: EPDM
SSV 300
Normally open (NO)
Connection: Welding ends
Seals: EPDM
SSV 210
Normally open (NO)
Connection: Welding ends
Seals: EPDM
SSV 220
Normally open (NO)
Connection: Welding ends
Seals: EPDM
SSV – Single Seat Valves – (NC) – Inch
SSV 200
Normally closed (NC)
Connection: Welding ends
Seals: EPDM
SSV 300
Normally closed (NC)
Connection: Welding ends
Seals: EPDM
SSV 210
Normally closed (NC)
Connection: Welding ends
Seals: EPDM
SSV 220
Normally closed (NC)
Connection: Welding ends
Seals: EPDM
SSV – Single Seat Valves – (NO) – Inch – Maintainable actuator
SSV 200
Normally open (NO)
Connection: Welding ends
Seals: EPDM
Maintainable actuator
SSV 300
Normally open (NO)
Connection: Welding ends
Seals: EPDM
Maintainable actuator
SSV 210
Normally open (NO)
Connection: Welding ends
Seals: EPDM
Maintainable actuator
SSV 220
Normally open (NO)
Connection: Welding ends
Seals: EPDM
Maintainable actuator
SSV – Single Seat Valves – (NC) – Inch – Maintainable actuator
SSV 200
Normally closed (NC)
Connection: Welding ends
Seals: EPDM
Maintainable actuator
SSV 300
Normally closed (NC)
Connection: Welding ends
Seals: EPDM
Maintainable actuator
SSV 210
Normally closed (NC)
Connection: Welding ends
Seals: EPDM
Maintainable actuator
SSV 220
Normally closed (NC)
Connection: Welding ends
Seals: EPDM
Maintainable actuator
SSV – Single Seat Valves – (NO) – Inch – W/SMS
SSV 210
Normally open (NO)
Connection: Welding ends/SMS
Seals: EPDM
SSV 220
Normally open (NO)
Connection: Welding ends/SMS
Seals: EPDM
SSV – Single Seat Valves – (NC) – Inch – W/SMS
SSV 210
Normally closed (NC)
Connection: Welding ends/SMS
Seals: EPDM
SSV 220
Normally closed (NC)
Connection: Welding ends/SMS
Seals: EPDM
SSV – Single Seat Valves – (NO) – DIN
SSV 200
Normally open (NO)
Connection: Welding ends
Seals: EPDM
SSV 300
Normally open (NO)
Connection: Welding ends
Seals: EPDM
SSV 210
Normally open (NO)
Connection: Welding ends
Seals: EPDM
SSV 220
Normally open (NO)
Connection: Welding ends
Seals: EPDM

 

Keeping you processing

For more information about our products and services please get in touch!

JAMIE WETHERILL
Internal Sales Manager

Call: 01777 712101
Email: jamie.wetherill@moodydirect.com