Tetra Pak Unique Mixproof Valves

Unique

The exceptional concept of this mixproof valve is characterized by excellent unmatched flexibility – yet still being very simple. The reliable modular design gives you the perfect valve for your exact needs in all mixproof operations with two different products flowing through one valve.
Unique is remote-controlled by means of compressed air. The valve is a normally closed (NC) valve. The valve has two independent plug seals, forming a leakage chamber between them under atmospheric pressure during every working condition. In case of rare accidental leaking of product, this will flow into the leakage chamber and be discharged through the leakage outlet. When the valve is open, the leakage chamber is closed. The product can then flow from one line to the other. The valve can be cleaned and water hammer protected to any level according to the needs in the specific process. There is virtually no spillage of product when operating the valve.

SpiralClean 

The Unique concept SpiralClean system to clean the upper and lower balanced plugs and leakage chamber, helping to meet the high hygienic standards of the sanitary flow industry. The system cleans more efficiently, uses less cleaning fluid by ensuring that a directional flow of CIP fluid reaches all the surfaces in much less time than with conventional systems. All external CIP systems for Unique includes the SpiralClean design as standard. Another benefit from the SpiralClean system is that it allows the Unique Mixproof valve to run under aseptic-like conditions. If you apply steam to the CIP pipes, this will form a steam barrier to the atmosphere.

Unique Basic – Inch

21-90, 3 ports
Connection: Welding ends
Material: 1.4404 (316L)
Seals: EPDM
Finish: Internal/external: Matt (blasted) Ra < 1.6

21-00, 3 ports
Connection: Welding ends
Material: 1.4404 (316L)
Seals: EPDM
Finish: Internal/external: Matt (blasted) Ra < 1.6

22-90, 4 ports
Connection: Welding ends                                                   Material: 1.4404 (316L)                                                       Seals: EPDM                                                                           Finish: Internal/external: Matt (blasted) Ra < 1.6

Unique Basic – DIN
21-90, 3 ports
Connection: Welding ends                                                  Material: 1.4404 (316L)                                              Seals: EPDM                                                                          Finish: Internal/external: Matt (blasted) Ra < 1.6
21-00, 3 ports
Connection: Welding ends                                                  Material: 1.4404 (316L)                                             Seals: EPDM                                                                          Finish: Internal/external: Matt (blasted) Ra < 1.6
22-90, 4 ports
Connection: Welding ends                                                  Material: 1.4404 (316L)                                             Seals: EPDM                                                             Finish: Internal/external: Matt (blasted) Ra < 1.6
Unique SeatClean – Inch
12-90, 3 ports
Connection: Welding ends
Material: 1.4404 (316L)
Seals: EPDM
Finish: Internal/external: Matt (blasted) Ra < 1.6
21-90, 3 ports
Connection: Welding ends
Material: 1.4404 (316L)
Seals: EPDM
Finish: Internal/external: Matt (blasted) Ra < 1.6
22-90, 4 ports
Connection: Welding ends
Material: 1.4404 (316L)
Seals: EPDM
Finish: Internal/external: Matt (blasted) Ra < 1.9
Unique SeatClean – DIN
12-90, 3 ports
Connection: Welding ends
Material: 1.4404 (316L)
Seals: EPDM
Finish: Internal/external: Matt (blasted) Ra < 1.6
21-90, 3 ports
Connection: Welding ends
Material: 1.4404 (316L)
Seals: EPDM
Finish: Internal/external: Matt (blasted) Ra < 1.6
22-90, 4 ports
Connection: Welding ends
Material: 1.4404 (316L)
Seals: EPDM
Finish: Internal/external: Matt (blasted) Ra < 1.6
Unique UltraClean – Inch
22-90, 4 ports
Connection: Welding ends
Material: 1.4404 (316L)
Seals: EPDM
Finish: Internal/external: Matt (blasted) Ra < 1.6

Keeping you processing

For more information about our products and services please get in touch!

JAMIE WETHERILL
Internal Sales Manager

Call: 01777 712101
Email: jamie.wetherill@moodydirect.com